Basic Services

Sight Installation

Dove rear screw front

We properly install dove tail sights while you wait.

$35

Dove rear pinned front

Have a pinned front sight? Not a problem our gunsmith will properly install them so you can spend your time putting bullets in the same hole.

$50

dove front

Getting the right front sight for you can make all the difference in the world.  Our gunsmith can put on your front sight out while you wait.

$15

Dove rear

Our gunsmith quickly and properly install dovetail rear sights while you wait.

$20

Leaf rear pinned front

Andy specializes in revolver work and revolver sights are no exception.

$65 + Parts

Pinned front

Don’t let a pinned front sight stop you from getting the aftermarket sight you have been wanting.  We Can change it out in a jiffy.

$35

Leaf rear

Andy can put in the perfect rear sight for your revolver.

$45 + Parts

ANdy sighting

Our gunsmith is a top notch shooter that will get you sights set just right.  Andy properly installs the sight set then goes into the range and shoots the firearm to get confirmation of the adjustment.

$20 + Ammo

Sight paint

Some of our clients like their sights but their eyes don’t pick up the factory sight color very well.  A good solution to this is to color fill your sights.  Our gunsmith can color fill your sights whatever color you would like them.

$15

Lasers

ANdy sighting

Lasers are a great alternative sighting mechanism.  We can zero it to whatever distance you would like.

$15

live sight in

Live fire sighting is an additional step that ensures your firearm is hitting exactly where you want it to.

$25 + Ammo

Grips

grip install

Having the right grips for you can be the difference between hating you gun and loving it.  Andy can quickly swap out you grips to something more aggressive for better recoil management or something softer for more comfort.  He also does grip hand fitting for revolvers which is $65 an hour.

$15 / $65 an hr for hand fitting

Firearm Cleaning

IMG_6436

To detail strip and clean we completely break down the firearm to remove all carbon and debris then lubricate all necessary parts  before reassembly.

 

$45

IMG_6436

To detail strip and clean we completely break down the firearm to remove all carbon and debris then lubricate all necessary parts  before reassembly.

$85

IMG_6436

To detail strip and clean we completely break down the firearm to remove all carbon and debris then lubricate all necessary parts  before reassembly.

$85

IMG_6436

To detail strip and clean we completely break down the firearm to remove all carbon and debris then lubricate all necessary parts  before reassembly.

$75-$120

 

 

Advanced Services

 

Glock

131467

Trigger kits are a great way to increase your accuracy while shooting fast.  Andy is well know for his incredible trigger work.

$25

ga_firing_line_g19_stippling_thumbrest_2

This is our favorite Glock trigger job! It greatly reduces the pre-travel and over-travel in the trigger resulting in faster follow up shots as well as greatly reducing pull weight which aids in shooting more accurately.

$150

IMG_7761

 

Red dot optics have been the top choice for shooters all over the world when speed is your highest priority.  The RMR slide cut allows you to mount a Trijicon RMR red dot sight on your Glock slide.  Our precise fit guarantees that you will have no point of impact shift as you run thousands and thousands of rounds through your Glock.  We machine the Glock slide to match your optic so precisely even with no screws the optic will hold its position on the slide.

$150 + $40 to Cerakote the slide

IMG_7767

 

Front cocking serrations are a huge asset to anyone who spends a lot of time behind a pistol.  As your get wet or sweaty it becomes more and more difficult to press check/clear malfunctions from the front of you pistol.   Front cocking serrations give you a nice positive surface to grab onto as you cycle the slide back.   Our skilled gunsmiths cut the serrations in a manner that does not interfere with the factory logos.

$125/ $225 with 45 corners

glock undercut

Trigger guard undercutting enables you to to get a higher grip which reduces felt recoil and muzzle rise.  Undercutting the trigger also makes the grip of the pistol more comfortable.

$35 for first cut      $55 for two

 

ga_firing_line_g30_Full_grip_stippling_undercut

Stippling dramatically decreases the amount of slippage between your hands and the pistol during recoil, enabling you to shoot faster without decreasing accuracy.

$190

View Stipple Gallery

ga_firing_line_g30_Full_grip_stippling_left.JPG

Stippling dramatically decreases the amount of slippage between your hands and the pistol during recoil, enabling you to shoot faster without decreasing accuracy.

$150/Add $35 for borders

View Stipple Gallery

ga_firing_line_back_strap_stippling

Stippling dramatically decreases the amount of slippage between your hands and the pistol during recoil, enabling you to shoot faster without decreasing accuracy.

$40

View Stipple Gallery

IMG_7964

The Discreet Magwell modification greatly decreases your mag change times without having to attach a large aftermarket magwell.

$50

ga_firing_line_glock_front_cocking_serrations_left

Front Cocking Serrations:

  • 6 Serrations on each side
  • Great for press checking
  • Easily clear malfunctions with or without gloves
  • Receive a $20 discount on slide Cerakoting
  • Add Slide Cerakoting to front cocking serration service for only $40!

$125/ $150 for angled serrations

*Slide will need to be refinished after cutting cocking serrations

**Refinishing is not covered in the price of package

View Custom Slide Work Gallery

ga_firing_line_glock_front_cocking_serrations_right

Front And Rear Cocking Serrations:

  • 6 Front cocking serrations and 8 rear cocking serrations
  • Great for press checking
  • Easily clear malfunctions with or without gloves
  • Receive a $20 discount on slide Cerakoting
  • Add Slide Cerakoting to front cocking serration service for only $40!

$275

*Slide will need to be refinished after cutting cocking serrations

**Refinishing is not covered in the price of package

View Custom Slide Work Gallery

 

Smith & Wesson M & P

 

 

APEX CU

Duty/Carry – Call or email for kit price

  • 4.5Lbs trigger pull weight

Forward Set Sear Kit – Call or email for kit price

  • 4.5 Lb pull weight
  • Reduces pre travel and over travel by 30%
  • Improved trigger shoe (curved aluminum, Flat aluminum, Curved polymer)

 $35 + Parts

 

full no back

Installing a gunsmith fit Apex match grade barrel is a great way to take your Smith and Wesson M&Ps accuracy to the next level.  Our gunsmiths expert craftsmanship guarantees a perfect fit every time.

$95 + The cost of the barrel

M+P undercut

Trigger guard undercutting enables you to to get a higher grip which reduces felt recoil and muzzle rise.  Undercutting the trigger also makes the grip of the pistol more comfortable.

$35 for first cut           $55 for two

ga_firing_line_full_grip_stippling

 

Stippling dramatically decreases the amount of slippage between your hands and the pistol during recoil, enabling you to shoot faster without decreasing accuracy.

$150

View Stipple Gallery

ga_firing_line_M&P_frontstrap_stippling

GFL Gunsmithing M&P front strap grip stippling.

Stippling dramatically decreases the amount of slippage between your hands and the pistol during recoil, enabling you to shoot faster without decreasing accuracy.

$50

View Stipple Gallery

ga_firing_line_M&P_backstrap_stippling

GFL Gunsmithing M&P back strap grip stippling.

Stippling dramatically decreases the amount of slippage between your hands and the pistol during recoil, enabling you to shoot faster without decreasing accuracy.

$55

View Stipple Gallery

Internal polish

This is a great option for people that love a smooth trigger pull.

$15 with trigger kit install

 

ga_firing_line_M&Pc

 

Springfield XD/XDM

ga_firing_line_Trigger_kit_install

Our smiths are known for their work on triggers.  They makes sure you get the best performance out of whatever trigger kit you decide to go with.

$35-$60

GFL Gunsmithing XD grip reduction.

GFL Gunsmithing XD grip reduction.

$175

 

XD full pic

 

1911

GFL Gunsmithing 1911 trigger jobs.

GFL Gunsmithing 1911 trigger jobs.

1911 Trigger Job

Our 1911 Trigger Job gives you a crisp breaking lightweight trigger pull that brings out everything you love about a 1911.

$70 +Parts

GFL Gunsmithing 1911 beavertail fitting.

GFL Gunsmithing 1911 beavertail fitting.

Beavertail Fitting

Proper beaver tail fitting is essential to the comfort of the 1911’s grip and the operation of of the grip safety.

 

$85 + Parts

 

GFL Gunsmithing 1911 magwell fitting.

GFL Gunsmithing 1911 magwell fitting.

Bevel Aftermarket Magwell

All 1911 shooters know how fast an eight round mag runs empty.  Beveling your aftermarket magwell will make sure that no matter how the mag hits the magwell it will be corrected with a smooth transition into the pistol grip giving you a much faster reload.  Aftermarket maxwells also provide a much larger margin for error when reloading.

$85 + Parts

GFL Gunsmithing 1911 front strap checkering.

GFL Gunsmithing 1911 front strap checkering.

Front Strap Checkering 

Front strap checkering greatly reduces the amount of slippage between the pistol and your hands as the pistol generates recoil.  Increasing the texture on the front strap allows your fingers get better traction on the front of the pistol which cuts down on the vertical rise during recoil, allowing you to get back on target faster.

$275

GFL Gunsmithing 1911 front cocking serrations.

GFL Gunsmithing 1911 front cocking serrations.

Front Cocking Serrations

Front cocking serrations not only look amazing, they also improve your ability to press-check your 1911 from in front of the ejection port with or without gloves.  If you are the type that likes to shoot in the muck and the rain, you will love our 1911 front cocking serrations.

$100

GFL Gunsmithing 1911 triton slide cuts.

 

Tri-top Slide Cuts

Tri-topping your 1911 slide takes it from a run of the mill 1911 and transforms it into an elegant thing of beauty that you don’t see everyday.  Some of the side benefits of trip-topping your slide are slightly increased cycle rate and a less obstructed view from behind the pistol.

$150

ga_firing_line_1911_ANDY_TOP_SERRATIONS

 

Top Slide Serrations

Top slide serrations are a great way to cut down on the glare from the top of your slide on those bright summer days and they add a certain elegance to your 1911.

 

$75

ga_firing_line_DELTA_ELITE

 

Sig Sauer

GFL Gunsmithing Sig SRT kit installation

Installing an S.R.T. kit greatly reduces the amount of travel required to reset the trigger.

 

$50

ga_firing_line_SRT_trigger _job

 

Our Sig P-Series trigger job includes the Stage 1 polishing of internal parts then takes it a step further by adding Sigs SRT trigger kit which cuts your trigger reset distance in half.  The Stage 2 trigger job produces a smooth lightweight, fast reseting trigger that you are sure to fall in love with.

  • Polish and rework factory parts
  • Install SRT (Short Return Trigger) trigger
  • Further reduces reset
  • Reduces trigger pull weight or single 4 and double 8.25

$75 + Parts

 

Sig-X-Five-ShortSmart

 

Beretta  

GFL Gunsmithing Beretta 92/96 trigger job

Beretta 92/96 Trigger Job

Our Stage 1 trigger job gets rid of the “gritty” feeling you experience when you press the trigger and reduces the pull weight producing a smooth lightweight trigger.

  • Reduces double single pull weight

 $150

 

 

Beretta full

Smith & Wesson and Ruger Revolver Work

GFL Gunsmithing Revolver trigger job

Andy performs world class trigger work.  His revolver trigger job will reduce the weight of pull and smooth out the trigger stroke.

$45 + Parts

GFL Gunsmithing Revolver cylinder chamfering

Chamfering you revolver cylinder will greatly decrease your reload time by speeding up the alignment of the bullets as they are dropped into the cylinder.

$90

 

RVL chamfering